Skip to content

Troubleshooting

No unique topic

dedrunk topics BAG lists the candidates. Set input.topic and, for extrinsics, trajectory.topic.

No still holds found

Start at rest for intrinsics.static.init and hold each orientation for intrinsics.static.min_hold. intrinsics.static.threshold is relative to the initial noise floor. Raising it tolerates vibration, lowering it rejects slow motion.

Large intrinsics residuals, no gyroscope scale

The orientations were too similar or the rotations shared an axis. Record more distinct holds, or use intrinsics.accel_model = "scale-bias" when only six faces are reachable.

No random-walk slope

The recording is too short or disturbed. Record longer and keep noise.cluster.max below a tenth of the duration, see noise.

Wrong gravity, translation not measured

The motion lacked tilt or fast rotation about several axes. A lower lidar_imu.observability_threshold does not add information, see results.

Too little overlap

The clock search removes lidar_imu.max_time_offset from both ends. Check the timestamps, the time window and that both recordings cover the same motion.

Pelorus gets worse with the calibration

Check for filtered instead of raw IMU data, timestamps and units, then the transform direction and the sign of the clock offset, see the Pelorus calibration guide.