Scale, misalignment and bias¶
The accelerometer and gyroscope model of Rehder et al., ICRA 2016, fitted with the multi-position method of Tedaldi et al., ICRA 2014.
Recording¶
Start at rest for intrinsics.static.init (4 s). Then hold the sensor still
in at least nine orientations, twelve covering all octants if possible, and
rotate about a different axis between holds. Without rotation about distinct
axes only the gyroscope bias is fitted.
Guided recording¶
dedrunk imu record reads a live IMU from the Minot network, prompts for each
orientation, detects when the sensor has settled and fits the result:
pelorus online raw imu &
dedrunk imu record /ouster/imu --bag intrinsics.mcap -O imu_intrinsics.yaml
--poses sets the number of orientations (12, at least 9). Publisher and
Dedrunk must use the same --coord-mode. After Ctrl+C the recording is
kept for dedrunk intrinsics imu.
Fit¶
poses: 12 duration: 42.5 s rate: 200.0 Hz
accelerometer: rms 0.0021 m/s^2, max 0.0043 m/s^2
gyroscope: rms 0.021°, max 0.055° over 11 segments
The still stretches are found automatically. An accelerometer residual of a few mm/s² is typical for MEMS parts. Larger values point to similar orientations or a soft support.
When only the six axis-aligned faces are reachable, the reduced model drops misalignment and needs six holds:
Merge the result with the noise file, see results.